How to Add CP Plus Cameras with Hikvision NVR | Complete Setup Guide
Table of Contents
How to Add CP Plus Camera with Hikvision NVR | Complete Setup Guide
Connecting CP Plus IP cameras with a Hikvision NVR is possible through ONVIF protocol. Many users face compatibility issues, but with the right settings, you can easily integrate CP Plus cameras into Hikvision’s NVR system. Below is a step-by-step guide to help you configure and add your camera properly.
Step 1: Find the IP Address of CP Plus Camera
- Use the CP Plus Config Tool or your network scanner to find the camera’s IP address.
- Note it down for later use.
Step 2: Login and Set Camera Password & Static IP
- Open the camera in your browser using the IP.
- Set a login password for security.
- Assign a static IP to avoid changes after reboot.
Step 3: Change Camera Security Settings
- Login to the camera web interface.
- Go to System → Safety.
- Uncheck extra security options (as per your screenshot in the document).
Step 4: Configure Network Settings
- Navigate to Network → Access Platform.
- Turn off ONVIF authentication for smooth communication.
Step 5: Create an ONVIF User
- Go to ONVIF settings in the camera.
- Create a new ONVIF user (do not use admin).
- Set a strong password for this user.
- This ONVIF user will be used for NVR integration.
Step 6: Add Camera to Hikvision NVR
- Open Hikvision NVR interface.
- Go to Camera Management → Add Camera Manually.
- Enter:
- IP Address (of CP Plus camera)
- Protocol: ONVIF
- Port: 80
- Username & Password: ONVIF user credentials (from Step 5)
- Save the settings.
✅ Now, your CP Plus camera should display video feed on Hikvision NVR.
Download word file with image guidence
